Micro Linear Encoder Scale for Micro Milling And Lathe Machine
Linear grating ruler are used in various machines with digital readout System together, which is often used to detect the coordinates of the tool and the workpiece, to observe and track the cutting error, in order to play a role in compensating the movement error.
Advanced Optical Measuring System
The GS series scales of the slide carrier , use a five bearing design for optical grating linear transducer which has been proven as the most reliable system design in today's market.
Sealing Lip
The plastic seals of GS series scales use an innovative material to offer superior oil resistance, high elastic recovery properties and durability, carefully designed lips geometry offer low slide resistance.
| | GS90 |
| Measuring Standard | Glass Scale - Grating period: 20μm (0.02mm) |
| Optical Detecting System | Transmissive Infrared System: wave length 880mm |
| Slide Carrier System | Vertical five bearings supporting system |
| Resolution | 5μm |
| Measurement Travel | 50-500mm | Every 50mm per length Spec. up to 500mm |
| Accuracy | 50-500mm | ±10μm |
| Repeatability | 5μm (0.005mm) |
| Hystersis | 5μm (0.005mm) |
| Protection | IP 53 |
| Power supply | DC 5V ± 5% |
| Output Signal | TTL |
Installation Diagram
Connector interface
DSUB 9PIN
| PIN | TTL |
| Signal | Cable |
| 1 | —— | —— |
| 2 | 0V | Orange |
| 3 | —— | —— |
| 4 | GND | GND |
| 5 | —— | —— |
| 6 | A | Yellow |
| 7 | 5V | Red |
| 8 | B | Green |
| 9 | R | Brown |
Linear scale connector uses gold-plated pins to avoid poor contact,ensure it will not rust for long time usage.
100% Laser calibration
All glass grating transducers are individually inspected and calibrated by our in-house laser interferometer to ensure measuring accuracy comply 100% with the specifications.
Product Tags:
|
|
5 µm Cnc Micro Linear Encoder Scale for Micro Milling And Lathe Machine Images
|
